How to Use Dental LED Curing Light?
We list some Steps of using dental curing light in this article.
The advantages of Rundental LED Curing Light
The Rundental LED Curing Light is often used as LED light, with many advantages：
| No. | Advantage | Effect |
| 1 | Small size | Reduces strain |
| 2 | Low power consumption | Reduce charging |
| 3 | No power cord | Easy to carry |
| 4 | Small heat radiation | Health protection |
| 5 | Long lifespan | Worry-free |
| 6 | High brightness | Improve accuracy |
| 7 | Robust and durable | Worry-free |
| 8 | Environmental protection | Reduces pollution |
Preparation before using Dental Curing Light
- Choose a China Dental Curing Light that matches the resin, check if it is damaged and if the lamp head is clean.
- Test the curing light intensity between 500Mw/cm2 and 2000Mw/cm2 before use. Check if the lamp head can cover most of the repair area and design the light location.
The Steps of Using Dental Curing Light
- Clean and check the curing light guide head, use disposable protective film.
- Protective cover crease should not be on the light site. Abrasion should be against the light head.
- Check that the light curing lamp is in the correct operating mode as shown in the user manual.
- Wear goggles and stabilize the curing light guide tip. Align the light guide head to the filler position.
- Make sure that the tip of the light guide tip should cover all areas.
- For the lingual filling body, the light curing unit should be placed on the lingual side as far as possible to irradiate.
- Operate strictly according to the instructions of China dental LED curing light.
- Do the regular cleaning, disinfection and proper isolation.
- Regularly check whether the light intensity and curing output power are working properly.
- Clean and disinfect before and after each use.
If you need more information, you can refer to our previous article about How to choose a good dental curing light unit.We have several models of high quality LED curing light, welcome to send inquiry to us.