Why The Dental Handpiece Cannot Clamp The Bur Tightly?

Dentists will meet some common questions in the process of using dental high speed handpiece, such as why the dental handpiece cannot clamp the bur tightly? Of course, there are China dental handpiece importers who have the same questions when selling and repairing dental handpieces.

Here are the analysis and methods of the reasons for dental turbine handpiece cannot clamp the bur, so dental dealers can give the dentist solutions according to the problems.

1.Wrong position of dental bur

Problem

The bur was not inserted in the most suitable position.

Method

Press the back cover with your thumb and insert the bur into the most suitable position until it jams.

2. Deformation of dental handpiece head

Problem

The back cover or the head of dental handpiece falls to the ground and deformation.

Method

Observe whether the back cover and the head are deformed, then replace the back cover.

3. The bur does not meet the standard size

Problem

The diameter of the tail of the dental bur is small and does not meet the standard requirements.

Method

Replace the bur that meets the standard size.

4. The chuck is dirty and get stuck

Problem

The dirt plugs the chuck groove, and the chuck cannot be closed.

Method

Clean the chuck.

5. The three-lobe spring is damaged

Problem

The three-lobe spring wear and damage.

Method

Replace the three-lobe spring.

6. Rust and clamping mechanism

Problem

Rust of the bur and clamping mechanism.

Method

Replace the bur and clamping mechanism, and regularly inject oil to clean and maintain.

At last, our dental high speed handpiece adopts a very good quality clamp spindle with a special structure that makes the dental bur to be clamped tighter and tighter after working, and will not be unclamped. You can send inquiry to us to buy the relevant high quality China dental handpiece.