China dental handpiece factory: Tips for the maintenance and care of dental implant 20:1 contra angle

Benefit of proper cleaning, disinfection and maintenance

Proper cleaning, disinfection and maintenance can make the operation of dental 20:1 implant contra angle go smoothly and protect the medical safety of patients and medical staff, and prevent cross-infection.

If the post-operative cleaning and maintenance is not proper, the mechanical parts of the China dental handpiece will be rusted and damaged, bringing unnecessary economic losses to the department and hospital.

Maintenance methods of implant contra angle

1. The water outlet hole of the China dental handpiece should be cleaned and unclogged regularly according to the volume of surgery to avoid blockage.
2. After each use of the implant dental handpiece, please be sure to use a special cleaning agent to clean and disinfect the inside and outside of the dental handpiece initially.
3. Before cleaning the implant contra angle 20:1, please make sure to wear protective tools, such as disposable gloves, mask, etc.
4. Aim the cleaner nozzle at the end of the phone, press the switch for 1-2 seconds, and see the liquid sprayed from the front nozzle of the implant contra angle change from cloudy to transparent.
5. Prepare a clean and soft cloth, spray the cleaner on the cloth. Wipe the surface of the dental handpieces evenly.
6. After cleaning the China dental handpiece for implant, please use special lubricant to lubricate the dental implant contra angle.
7. Put on the protective tools and aim the lubricant nozzle at the end of the dental handpiece and press the switch for 1-2 seconds.
8. Wipe the residual liquid on the surface of the implant dental handpiece with a clean and soft cloth.
9. Press the switch of the dental handpiece needle holder and install the standard rod that comes with the implant dental handpiece.
10. Run the dental handpiece at appropriate slow speed (about 300-500rpm) for 10-15 seconds to spread the lubricant evenly in the implant dental handpiece.
11. Please use wrapped autoclave.

Maintenance tips of implant contra angle

1. Since the blood will coagulate within 30 minutes, after coagulation and then oiling, even if the oiling machine is used, there will still be blood left inside the dental handpiece 20:1 contra angle for implant, and the dental drill handpiece will not turn after a long time. Therefore, when the implant surgery is in the suturing stage, please ask the nurse to take out the implant handpiece in advance to prepare for oiling.
2. Insert the dental implant handpiece into the low-speed motor or implant machine, place the head in a glass of clean water and turn it forward for 15 seconds and reverse for 15 seconds to flush out the maximum amount of blood and other foreign matter from the head.
3. Rinse the dirt on the surface of the China dental equipment handpiece with water. Be careful not to let water flow in from the end of the dental low speed handpiece, which is one of the possible causes of dental handpiece failure.
4. Use the special nozzle inside the box, insert the special nozzle from the end of the implant 20:1 contra angle for oil injection, inject oil for 3 seconds each time, repeat 3-4 times until the oil coming out from the head of the dental handpiece is not mixed with blood and other impurities.
5. Packing, disinfection at 121℃. (If the dental implant contra angle is ready to be oiled when it is more than 30 minutes away from use, oil it first, then proceed to steps 2 and 3, then oil it, and finally pack it to disinfect it)

Therefore, the care and maintenance of China dental handpiece is particularly important! If you need a high quality and no-worry after sales for an implant contra angle 20:1 dental handpiece, you can refer to our Rundental 20:1 dental handpiece for implant.