What should be noted when installing the dental equipment?

1.Pay attention to the technical parameters

Pay attention to the voltage, current, power and other technical parameters of dental equipment when installing various types of dental equipments. Choose suitable sockets and install fuses. Some large dental equipments such as x-ray machines, there should also be a regulated power supply to ensure the quality of work. All technical parameters must be in line with the provisions of the manufacturers, in that way when have problems can be traced to the manufacturer’s responsibility.

2. Debug the dental equipment

After the installation of dental equipment, also need to debug them. The staff of the clinic should consult and learn from the technicians who have installed and debugged the dental equipment carefully, master the operating method, and ensure the normal operation of the dental equipment after trial use. If the dental equipment is not working properly, it is the supplier’s responsibility to replace the wrong parts until the whole equipment is replaced. Like cars, larger and more complex devices have a process of adaptation. After six months to a year of use, it is necessary to do a comprehensive test and maintenance, and then can enter the routine maintenance procedures. All this work should be done by the dental equipment supplier.

3. Panoramic machine is necessary for future development

Take the x-ray machine as an example, the corresponding wires, sockets and fuses should be laid before installation to ensure that they conform to the technical parameters of the machine. Dental clinics should be able to install voltage regulators to ensure that the x-ray machine can work properly at all times. If conditions, in addition to x-ray machine,should be installed the oral panoramic machine, even temporarily due to financial difficulties can not install the oral panoramic machine, to set aside enough space for future development. The oral panoramic machine is necessary for the dental clinic which is mainly used for orthodontic treatment.

4. Choose the right air compressor

Air compressor and dental chair should use the same amount of air when installing the dental equipment. The working pressure of the floor box of each dental chair should be 4.5 KG/CM, the working pressure of the high-speed dental handpiece should be controlled at 2.2 kg/cm, and the working pressure of the low-speed dental handpiece (pneumatic) should be controlled at 3.0 kg/cm. The Air compressor must be oil-free and water-free. The imported dental air compressor can meet the requirement of oil-free and water-free, but it is noisy and expensive. If you buy a low-noise compressor, then there is oil in the trachea, and the volume is not large, multi-dental chairs for the clinic is not suitable.

Rundental sells the suitable dental chair air compressor for dental clinic,welcome to send inquiry to us.